ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable

ProbeBOX 1.0 Electrode-Basic-Kit "EC" (Plastic body) (K = 1.0)

€596,00
Skip to product information
ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable
  • ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable
  • PrimeLab 2.0 photometer connected to a ProbeBOX 1.0 switch box and a pH electrode with protective storage cap
ProbeBOX 1.0 Electrode-Basic-Kit "EC" (Plastic body) (K = 1.0)

ProbeBOX 1.0 Electrode-Basic-Kit "EC" (Plastic body) (K = 1.0)

PL2SP-ElECLRPCATC-Kit

Brand: Water-i.d.

Manufacturer: Water-i.d. GmbH
€596,00

Works with: PrimeLab 2.0

Made to order · ships in 11–13 business days Delivery across Europe in 3–7 business days after dispatch · ships from Spain and Germany

Use ProbeBOX 1.0 to connect external probes to PrimeLab 2.0 via USB-C and an A/D switch box, so the photometer can control the probe and capture stable measurements. Add pH, ORP, conductivity (EC/TDS/salinity) and temperature testing (probe-dependent), then save readings to your sampling points and sync to LabCOM Cloud (optional).

  • 1 x Grey carrying case with foam insert.
  • 1 x "PL2Sp-ElECLRPCATC" Plastic Body – Conductivity Electrode (K = 1.0). Designed for high-accuracy in a wide range of conductivity measurement (0 – 200 mS/cm).
  • 1 x "Pl2Sp-Pbox" A/D-Switch-Box with BNC-IN and USB Typ-C-OUT to connect an EC-probe to the PrimeLab 2.0 Photometer or an Android® smartphone.
  • 1 x "PL2Sp-KCl3mol-10" dropper bottle with 10 ml KCl-electrode soaking solution.
  • 1 x "EMECbuf1118-50" 50 ml "EC 111.8 mS/cm" calibration solution.
  • 1 x "PL2Sp-PboxCable" USB cable for the ProbeBOX 1.0. 1 metre. Type-C / Type-C.
  • 1 x User manual.

Specifications

Brand, compatible photometers, SKU and key specs
BrandWater-i.d.
ManufacturerWater-i.d. GmbH, Germany
Compatible photometersPrimeLab 2.0
SKUPL2SP-ElECLRPCATC-Kit
EAN8436619211506
  • Product type: Starter kit – electrode, ProbeBOX 1.0 & accessories
  • Compatibility: PrimeLab 2.0 or compatible Android smartphone via ProbeBOX 1.0
  • Intended use: General water conductivity measurement
  • Measuring range: EC 0–200 mS/cm
  • Resolution: 1 µS/cm
  • Temperature range: 0–50°C with ATC
  • Cell constant (K): 1.0
  • Electrode body: Plastic

Compatible reagents and accessories

What this product does

The ProbeBOX 1.0 connects the included EC electrode to PrimeLab 2.0 via USB-C and an A/D switch box, enabling EC (conductivity) and TDS measurement and optional synchronization with LabCOM Cloud.

Kit Contents
  • 1 × Grey carrying case with foam insert
  • 1 × Plastic EC Electrode (PL2Sp-ElECLRPCATC) – K = 1.0, for conductivity measurement
  • 1 × ProbeBOX 1.0 (Pl2Sp-Pbox) – A/D switch box with BNC input and USB Type-C output
  • 1 × KCl Electrode Soaking Solution (PL2Sp-KCl3mol-10) – 10 mL
  • 1 × EC 111.8 mS/cm Calibration Solution (EMECbuf1118-50) – 50 mL
  • 1 × USB-C Cable (PL2Sp-PboxCable) – Type-C to Type-C, 1 m
  • 1 × User Manual

Storage & Care

Store the kit in its carrying case in a clean, dry place, protected from excessive heat, moisture and direct sunlight.

  • Electrode: Rinse with distilled water after calibration or measurement to help prevent cross-contamination.
  • Calibration solution: Keep tightly closed and follow the expiry date shown on the bottle.
  • KCl solution: Keep tightly closed when not in use.
  • Shelf life: No defined expiry date for the hardware components; solutions should be used according to their stated expiry dates.

Questions about this product

What is this ProbeBOX 1.0 kit designed to measure?

This kit is designed for EC (conductivity) measurement using the included K = 1.0 plastic-body electrode.

Can I connect the EC electrode directly to PrimeLab 2.0?

No. The electrode connects to the ProbeBOX 1.0 A/D switch box, which then connects to PrimeLab 2.0 via USB-C.

Does the kit include everything needed for calibration?

Yes. The kit includes 50 mL EC 111.8 mS/cm calibration solution, together with the EC electrode, ProbeBOX 1.0, USB-C cable, KCl solution, carrying case and user manual.