ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable

ProbeBOX 1.0 Electrode-Kit "High Range EC Probe" (Plastic body / corrosion resistant) (K = 10)

€746,00
Skip to product information
ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable
  • ProbeBOX 1.0 A/D switch box connecting an electrode probe to a PrimeLab 2.0 photometer via USB-C cable
  • PrimeLab 2.0 photometer connected to a ProbeBOX 1.0 switch box and a pH electrode with protective storage cap
ProbeBOX 1.0 Electrode-Kit "High Range EC Probe" (Plastic body / corrosion resistant) (K = 10)

ProbeBOX 1.0 Electrode-Kit "High Range EC Probe" (Plastic body / corrosion resistant) (K = 10)

PL2SP-ElECHRPCATC-Kit

Brand: Water-i.d.

Manufacturer: Water-i.d. GmbH
€746,00

Works with: PrimeLab 2.0

Made to order · ships in 11–13 business days Delivery across Europe in 3–7 business days after dispatch · ships from Spain and Germany

Use ProbeBOX 1.0 to connect external probes to PrimeLab 2.0 via USB-C and an A/D switch box, so the photometer can control the probe and capture stable measurements. Add pH, ORP, conductivity (EC/TDS/salinity) and temperature testing (probe-dependent), then save readings to your sampling points and sync to LabCOM Cloud (optional).

  • 1 x Grey carrying case with foam insert.
  • 1 x "PL2Sp-ElECHRPCATC" Plastic Body – Conductivity Electrode (K = 10). Designed for high-range conductivity measurement. Electrode size: 5×5 mm platinum ring / 2 pole.
  • 1 x "Pl2Sp-Pbox" A/D-Switch-Box with BNC-IN and USB Typ-C-OUT to connect an EC-probe to the PrimeLab 2.0 Photometer or an Android® smartphone.
  • 1 x "PL2Sp-KCl3mol-10" dropper bottle with 10 ml KCl-electrode soaking solution.
  • 1 x "EMECbuf212-50" 50 ml "EC 212 mS/cm" calibration solution.
  • 1 x "PL2Sp-PboxCable" USB cable for the ProbeBOX 1.0. 1 metre. Type-C / Type-C.
  • 1 x User manual.

Specifications

Brand, compatible photometers, SKU and key specs
BrandWater-i.d.
ManufacturerWater-i.d. GmbH, Germany
Compatible photometersPrimeLab 2.0
SKUPL2SP-ElECHRPCATC-Kit
EAN8436619211476
  • Product type: Starter kit – electrode, ProbeBOX 1.0 & accessories
  • Compatibility: PrimeLab 2.0 or compatible Android smartphone via ProbeBOX 1.0
  • Intended use: High-range conductivity measurement
  • Measuring range: EC 20–2000 mS/cm
  • Resolution: 1 µS/cm
  • Temperature range: 0–50°C with ATC
  • Cell constant (K): 10
  • Sensor: Platinum ring, 5 × 5 mm, 2-pole
  • Electrode body: Plastic

Compatible reagents and accessories

What this product does

The ProbeBOX 1.0 connects external probes to PrimeLab 2.0 via USB-C and an A/D switch box, enabling probe-based measurements and optional synchronization with LabCOM Cloud. This kit is configured for high-range conductivity measurement with a K = 10 EC electrode.

Storage & Care

Store the kit in its carrying case in a clean, dry place, protected from excessive heat, moisture, and direct sunlight.

  • Electrode: Rinse with distilled water after calibration or measurement to help prevent cross-contamination.
  • Calibration solution: Keep tightly closed and follow the expiry date shown on the bottle.
  • KCl solution: Keep tightly closed when not in use.
  • Shelf life: No defined expiry date for the hardware components; replace accessories or solutions according to their condition and stated expiry dates.

Questions about this product

What is this ProbeBOX 1.0 kit designed to measure?

This kit is designed for high-range conductivity measurement using the included K = 10 EC electrode.

Can I connect the EC electrode directly to PrimeLab 2.0?

No. The electrode connects to the ProbeBOX 1.0 A/D switch box, which then connects to PrimeLab 2.0 via USB-C.

Does the kit include everything needed for calibration?

Yes. The kit includes 50 mL EC 212 mS/cm calibration solution, along with the EC electrode, ProbeBOX 1.0, USB-C cable, KCl solution, carrying case, and user manual.